Dish punched for 2 XLR / Speakon

NLJ2MD-V

2 pole combination of speakON socket and 1/4" jack receptacle, vertical pcb mount, same pcb footprint and panel cut out as NL4MD-H

First speakON / jack hybrid panel mount connector combining the speakON chassis connector with a 1/4" 2 pole jack socket permitting connection using either type of plug. The speakON Combo mates with all 2- and 4-pole speakON cable connectors and 1/4" jack plugs utilizing 2 contacts.

Features & Benefits

• Combine Speakon D size receptacle and 1/4" jack
• Save rack space and costs by combining 2 connectors in one housing
• Mates with two types of connectors offering greater flexibility of interconnections
• Rear panel mount
• PA-wiring: 1+ is connected to Tip, 1- to Sleeve

Files:

• Datasheet

NL4MPXX

4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16" flat tabs
The state-of-the-art chassis connector for loudspeaker / amplifier applications. They feature a unique locking system, robust plastic housing and high current silver plated contacts.

Features & Benefits

• Contact resistance: ≤ 2 mΩ
• Dielectric strength: 2.8 kVac
• Insulation resistance: >0.1 GΩ (after dampheat)
• Rated current per contact: 25 A rms continuous (audio rating signicantly higher, depending on signal)
• Rated voltage: 250 V ac
• Attention: speakON is NOT to be used as an AC mains or power supply connector!
• Lifetime: > 5000 mating cycles
• Termination: 3/16" (at tabs (e.g. NLFASTON)
• Locking device: Quick Lock
• Chassis shape: D
• Layout standard hole position, thru holes

Files:

• Datasheet

• Rubber foot with steel insert
• Size: d = 38 mm, h = 15 mm
• Pack of 4
• Screws included

Width approx. 135 cm
Price per running meter
Color reproduction depends on the computer monitor and may vary
Supplied as one continuous piece when ordering more than 1 m

Material:

• 80% PVC film
• 20% polyester-cotton fabric
• REACH compliant

Please note!
When ordering more than 1 m of Tolex and selecting Deutsche Post / DHL Paket or Express as the shipping method, the Tolex will be cut to a width of approx. 115 cm. This is due to the maximum permitted parcel length of 120 cm for these shipping services.
To receive the full roll width, GLS or ExprexxXL must be selected as the shipping method.