Cloth Wire AWG #22 (0,32 mm²) braided, white, 5 m

• Material: K5A
• Size: 3,5 x 4,7 x 0,8 mm
• Impdance Min 25MhZ 35 Ohm
• Impdance Max 100 MhZ 60 Ohm
• Tolerance: 25 %

• Pri.: 0-230V-240V (50Hz)
• Sec.1: 325-CT-325 V @ 85 mA DC   
• Sec.2: 6,3V C.T. @ 2,5A   
• Sec.3: 0-5V @ 2A
• Made in Europe

• Bronco, AA764, AB764, Blackface, Silverface
• Champ, Tweed, 5C1, 5E1, 5F1, AA764, Blackface, Silverface, Vibro Blackface
• Harvard, 6G10
• Princeton Tweed, 5B2, 5C2, 5D2, 5E2, 5F2, 5F2A
• Princeton, Brown, AA964, Blackface, Silverface
• Princeton Reverb, AA1164, AA764, B1270, Blackface, Silverface
• Fender Part Number 125P1B and 022772

Files:

• Datasheet

Rectifier
An indirectly heated diode intended for rectification of commercial-frequency alternating current. It has a 140 mA maximum output and filament voltage of 5 V and a filament current of 2 A +/- 0.2 A.

Files:

• Datasheet

Totally Tweed! The preferred OEM tube of ’50s-era Fender Tweed Champ and Deluxe amplifiers The Tungsol 6V6 has a geometry designed to safely handle the higher voltages used in guitar amps – plus heavier plate and grid materials. The result.. better mids and bottom while keeping the smooth top of the classic 6V6’s. The Tungsol 6V6 breaks up evenly from low E to high up the neck. Blues players will LOVE these tubes for the way they sing!

Files:

• Datasheet

Jupiter Condenser “Vintage” Tone
Based closely on the Yellow Molded Astron capacitor for a more authentic tone to the time period. Construction is Aluminum Foil with Polyester(Mylar) Film Dielectric with tinned copper leads.

• Type: Polyester/Aluminum Foil
• Voltage Rating: 600VDC - Tested at 1200VDC
•   at three stages of production)
• Tolerance: +/-10% typically much closer
• Operating temperature: -55C - 85C, derate 50% at 125C
• Leads: 20awg Tinned Copper
• Application: Guitar Amplifier, Guitar Tone Control

Made in USA of US materials

• Type: Electrolytic capacitor
• Capacitance: 22 µF
• Voltage Rating: 35 V
• Tolerance: - 10 % / +30 %
• Operating Temperature Range: - 40°C / + 85 °C
• Dimensions: Ø 5 mm x 11 mm
• Termination Style: axial
• Color and manufacturer may differ from the picture shown

Images are for reference only. See Product Specifications

Drill Ø: 12 mm
Rated voltage: 250 VAC
Rated current: 10 A (VDE), 16 A (UL/CSA)

Premium Twin Triode ideal for use in reverb and driver circuits. Superior dissipation compared to NOS versions of this tube.

• Extra-low microphonics makes it the best 12AT7 choice for reverb circuits. Also suitable for HiFi.
• Factory selected for closest tolerances and most consistent performance
• ECC81 equivalent