Belton Retainer 2-19 / Large
Belton Retainer 2-19 / Large

Belton Retainer 2-19 / Large

Product No.:
bel-re2-2-19
In stock for immediate delivery. Delivery time depends on the destination country* In stock for immediate delivery. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.01 kg per piece
1,95 €

incl. VAT excl. Shipping costs

Customers who bought this product bought also the following products:

Roederstein MKT 1813 0,1µF / 400 V DC
  • Type: Metalized Polyester Film Capacitors
  • Voltage Rating: 400 V
  • Tolerance: +/- 10%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Termination Style: axial
1,45 €

Roederstein MKT 1813 0,047µF / 400 V DC
  • Type: Metalized Polyester Film Capacitors
  • Voltage Rating: 400 V
  • Tolerance: +/- 10%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Termination Style: axial
1,75 €

Wire Silicon 0,5 mm² black, 100 m spool
Wire Silicon, SiAF
  • Insulation: Silicon
  • Operation Voltage: 500 V
  • Test Voltage: 2000 V
  • Operating temperatures: –50 bis +180 °C
  • Packing: 100 m
  • Cross-Section: 0,5 mm²
  • Outer Diameter: 2,1 mm
  • Stranded wire structure: 16 x 0,20 mm, tinned copper
35,95 €
0,36 € per m

TT-Slo50 Soldano® SLO Powertransformer - 50 Watt Type
  • Primary: 115, 220, 230 & 240 V @ 50/60 Hz
  • Sec. 1: 720 V C.T. @ 200 mA, 60 V Bias Tap
  • Sec. 2: 6,3 V C.T. @ 6 A
  • Sec. 3: 6,3 V C.T. @ 3 A

Files:

125,00 €

Terminal 2+1 Solder lugs
  • 2+1 Solder lugs
  • lugs brass, tinned
0,92 €

Tube-Town Reverb Tank RCA cable, 48" (120 cm)
  • Reverb Tank RCA cable
  • ca. 48" (120 cm)
  • Right-Angle plugs
  • Replaces Fender Reverb-Tank RCA cable
1,95 €

Tung-Sol 7581A (35W 6L6)  Reissue - PAIR

2 tubes, matched as pair

Tung-Sol 7581A Reissue is a drop-in replacement for any 6L6 tube, 35 W Plate Disipation for maximum headroom.

84,40 €
42,20 € per Piece

Sovtek 12AX7 / ECC83 LPS

Very linear working 12AX7 / ECC83 with long anode plates and spiral heating, which makes the tube less sensitive to interference from AC heating.
We recommend this tube for audio and high-end amps as well as for "modern" Fender amps with more overdrive, but also as an input tube in old Marshall JCM800s.

Note: Tubes equipped with long plates are commonly associated with a "warmer" or "richer" sound, whereas those with shorter plates tend to deliver a "tighter sound". However, tubes featuring long plates exhibit increased sensitivity to vibrations and mechanical disturbances, rendering them less ideal for critical applications.

Files

19,90 €