Current filter
This is a kit of the famous Dumbleator, can be used as standalone device or for installation in an existing amplifier. When build as a stand-alone device, the kit can be powered with the TT-VPump, in an amplifier the kit must be supplied via the existing power supply of the amp. The Dumbleator offers numerous configuration options which are shown in the appended schematics. Input Levels: InA: 10-15 Vpp InB: guitar level - 5 Vpp The kit includes all the parts needed to build the "standard version" incl. a 12AX7, potentiometers and leads. It does not include components that are required for the building the extended versions, as well as a power supply or casing.
The Dumbleator utilize POTENTIALLY FATAL HIGH VOLTAGES. Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits. Use at your own risk.
Files:
Active, serial FX-Loop for a subsequent installation in an existing tube amplifier The FX-Loop works with two LND150 in the send and in the return stage. The send and return level can be adjusted to their optimal value with two potentiometers. The Loop works with the present high voltage of the amplifier. It has two inputs for low and high signal levels. Input Levels: InA: 30 - 60 Vpp, max. 65 Vpp InB: 10 - 15 Vpp, max. 18 Vpp
The FX-Loop utilize POTENTIALLY FATAL HIGH VOLTAGES. Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits. Use at your own risk.
Microcontroller-controlled MIDI switcher for channel switching or loop switching. Operation can be performed either via MIDI or a footswitch (momentary switch). !!! UPDATE !!! With the May 2019 update, the following adjustments were made to the module:
These changes allowed us to offer the kit in a more universal, flexible, and cost-effective way. More short information and software on the >>TT-Midi-Switcher project page
Included in delivery:
NOT included in delivery (order as needed!):
TT-MidiCntrl Hardwareplatform zum Aufbau von Midi-Fussschaltern oder ähnlichen Dingen. Für weitere Informationen, Schaltpläne und Beispile bitte die >>Projekt-Seite beachten. Im Lieferumfang enthalten:
Im Lieferumfang NICHT enthalten (Bestellung nach Bedarf!):
Files
Kit of an active, serial tube-driven FX-Loop (with parallel option) for a subsequent installation in an existing tube amplifier The FX-Loop works with one 6112 miniature tube in the send and in the return stage. The send and return level can be adjusted to their optimal value with two potentiometers. The Loop works with the present high voltage of the amplifier. It has two inputs for low and high signal levels. Input Levels: InA: 30 - 60 Vpp, max. 65 Vpp InB: 10 - 15 Vpp, max. 18 Vpp Heater: 6,3 V @ 300 mA The FX-Loop utilize POTENTIALLY FATAL HIGH VOLTAGES. Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits. Use at your own risk.
Vorprogrammierter Atmege16 Mikrocontroller mit "SimpleMidi" Firmware zur Verwendung im TT-MidiCntrl Bausatz.
{{.}}
{{{.}}}
